Installing Today’s Hybrid Pistol Offense Run & Pass from Top to Bottom
This manual provides you with the full offensive line, receiver, and quarterback mechanics for installing each offensive play presented. Coach Campbell has left no stone unturned for implementing today’s Pistol Offense into your program.
Looking for some different ways that some of you read coverages on film and how you coach your QBs to read coverages. Any tips or signs you look for to give a coverage away?
A) Scan the formation for uncovered receivers. If uncovered receivers — signal uncovered check.
B) Find the Weak Safety for PRE-SNAP read.
1. If the W/S is low — check other coverage keys for "Cover 0". 2. If the W/S is high — check other coverage keys for "Cover 1" or "Cover 3" 3. If there are 2 safeties and they are both low — check other coverage keys for "Cover 0". 4. If there are 2 safeties and they are both high — check other coverage keys for "Cover 2", "Cover 2/Man", or "Cover 4" (1/4's). 5. If there are 2 safeties and they are staggered — check other coverage keys for "Cover 1/Robber" or "Cover 3/Robber".
NOTE: QB must be aware of the following actions from a well "disguised" secondary in the dropback passing game:
A) If there is 1 safety and he rolls down hard after the snap — HAVE A PLAN VS. PRESSURE! B) If there are 2 safeties and both roll down hard after the snap — HAVE A PLAN VS. PRESSURE! C) If the W/S or 2 safeties maintain their alignment after the snap — execute your progression reads with an awareness of where the weaknesses are in the coverage and which coverage defender we are attacking.
We have used the following also, & it is very useful:
POST-SNAP READS ("READING THE SQUARE"):
One of the most important areas in determining secondary coverages is the middle of the field about 15 to 25 yards deep and about 2 yards inside of each hash. We call this area the "square".
We normally read the "square" in our drop back passing game. Reading the "square" becomes necessary when it is impossible to determine what the coverage is before the snap or to make sure of secondary coverage after the snap.
In reading the "square" the QB simply looks down the middle of the field. He should not focus on either Safety but see them both in his peripheral vision.
A) If neither Safety shows up in the "square", and both are deep, it will indicate a form of Cover 2. A quick check of Corner alignment and play will indicate whether it is a 2/Man or 2/Zone. If neither Safety shows up in the "square" and both are shallow, it will indicate a Cover 0 (blitz look).
B) If the Strong Safety shows up in the "square", this will indicate a Cover 3 rolled weak or possibly a Cover 1.
C) If the Weak Safety shows up in the "square", this will indicate a strong side coverage. It could be a Cover 3 or a Cover 1. If the coverage is Cover 3, it could be a Cover 3/Sky (Safety), or a Cover 3/Cloud (Corner), depending on who has the short zone.
NOTE: When either of the Safeties shows up in the "square", the best percentage area to throw the ball in is the side that he came from! If NEITHER of the Safeties show up in the "square" — throwing the ball into the "square" is a high percentage throw.